Mr Stromberg Carbs - Quality re-manufactured / rebuilt carbs
and setups.  Specializing in Stromberg 97 / 48 / 81's
Mr Stromberg

Phone: 913-244-0112
53-66 Buick Nailhead Intake Risers - Bolt them under your intake, Add horsepower and torque! Cast aluminum sold in pairs.
$89.99
Buick Nailhead 2x4 Intake - 57-66 401,425 2x4 manifold, This maifold is a dual plane design with consistent volume across all eight runners. Measures 4.5inches tall from the rear carb base to the intake gasket flange. Best suited for Carter AFB style carbs. Experience the most from this manifold when used with cam & lifter package.
$425.00
Buick Nailhead 3x2 Intake Manifold, 59-66 401 425, New design for the 59-66 401 and 425 Buick (nailhead) engines. This manifold is designed with matched port casting and consistent runner volumes. Using the same plenum design as our 2x4 manifold and keeping the profile to a minimum; this manifold delivers outstanding performance and traditional good looks. Can be ordered in 3 or 4 bolt patterns. (when using 3 bolt carbs; careful gasket placement is necessary to avoid vacuum leaks.) This manifold has a true 1.50 venturi for maximum flow. Works best with Rochester 2jet carbs or Barry Grant carburetors. If you really want your nailhead to peform; This is the manifold to do the job.
$425.00
Buick Nailhead 6x2 Intake - This manifold was based on the original log style manifolds that where designed for the 322 and stock valve covers. It's profile has been raised for more velocity and to clear linkage with aftermarket valve covers. Then the bases have been moved in order to use Holley 94's, Strombergs, and even Rochester 2jet carbs with ease. Then it was port matched to the 364, 401 and 425 motors, will still work on 265 and 322. Available in 3 bolt, 4 bolt and undrilled.
$329.99
Desoto 6x2 Log Intake Manifold, Now available. This manifold is available in a 3 or 4 bolt configuration for use with Stromberg, Holley or Rochester 2 barrel carbs. It's log type design allows it to be used with all Desoto hemi engines. It is tapped with 1/2 npt ports in the water jacket for use with a remote thermostat. Due to close proximity of mounting bolts to intake ports; socket head cap screws must be used to install. Part no. DS62
$489.99
Edelbrock flathead intake manifold - The famous Edelbrock "Super Dual" Ford flathead intake manifold. Designed for Ford and Mercury flathead engines made from 1938 to 1948. Includes offset generator bracket.
$289.95
New in stock - Offenhauser 6x2 intake for small block chevy pre-86, 3-bolt carbs like stromberg 97/48 or holley 94
$525.00
New Offenhauser 3x2 intake for small block chevy pre-86 for 3 bolt carbs like stromberg 97/48 holley 94
$449.00
Cadillac Finned Aluminum Cast Valve Covers - The fin design on these covers where inspired by the original stamped steel covers. They give the cadillac engine the distinct look it deserves and sets them apart from other cast valve covers. No name, No breathers and enough room for adjustable rockers.
$149.00
Cadillac Finned Aluminum Valley Pan as cast
$72.00
Cadillac Polished Finned Aluminum Valley Pan - This high quality cat pan is designed to git 49-62 Cadillac engines. It eliminates the center bolt and the road draft tube. It is available machined for PCV .
$99.99
Cadillac Polished Finned Aluminum Valley Pan with PCV (grommet and valve) - This high quality valley pan is designed to fit 49-62 Cadillac engines. It eliminates the center bolt and the road draft tube. Machined for PCV .
$124.99
Cadillac Polished Finned Aluminum Valve Covers. The fin design on these covers where inspired by the original stamped steel covers. They give the cadillac engine the distinct look it deserves and sets them apart from other cast valve covers. No name, No breathers and enough room for adjustable rockers.
$235.00
Cadillac Polished Finned Aluminum Fuel Pump Block off plate
$14.99
Chevrolet Small Block - Traditional series Polished Finned Aluminum - Highly polished with original rocketship logo, finned no holes for use with 59-up small block Chevy 327-350 etc. Heavy Cast part Made in USA. Arguably the highest quality SB Chevy cover on the market.
$235.00
Chevrolet Small Block Traditional Series Valve Covers - Fits all contemporary small block chevy engines. (will not fit heads with staggerd bolt pattern).
$159.99
Desoto Hemi Finned Valley Pan - Fits all Desoto hemi engines. Has the distinctive OE pan shape.
$72.00
2x2 to 4 Barrel Intake Adapter - Our newest addition is the 2x2 adapter. Cast from high grade aluminum and designed to use all 3 bolt carbs with ease. Runners are equal length to eliminate fuel turbulence in the plenum.
$79.99
Edelbrock S/B Chevy 3 x 2 3-Bolt Carb Intake Manifold-note pic is of 4-bolt but this is truely a 3-bolt carb intake, The Edelbrock C-357-B manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys. This 3x2 manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)
$299.99