Gas Alley Streetrods - Stromberg 97, Corvair
reversed steering boxes, Cowl Steering,  Speedway Parts and more
We carry all of these
manufactures products
plus more!  If they have
it in their catalogs, we
can generally beat their
published pricing, give
us a try!
We have parts at low prices for your traditional hot rod, rat rod, street rod, and custom.
We provide parts from all the manufactures you see to the right, plus reconditioned Stromberg 97's/48/81's,  
Reversed Corvair Steering boxes, and Cowl Steering adapters.  Give us a call for a competitive quote for all
your streetrod needs.  Yes we take Visa, MasterCard, Discover and PayPal
We can powder coat, build, order, supply, wire, almost anything auto related.  We carry all major
manufactures products, of which just a few are listed to the right here...They got it, you want it,
                                                                                                                               we get it-------------------->>>
===============================================================================================================================================================
=======================================================================================================================================================================================
Proud member of
SEMA.  Protecting all
car enthusiasts rights
Call us 913-244-0112 for
quotes on multiple carb
setups and your specific
needs.  We carry Stromberg
parts, linkage, fuel fittings,
etc. and back what we sell.
Check out our Specials for the lowest pricing available on those "have to have" items
Click Here
Check out our
Stromberg Carbs page
for Primaries,
Secondaries, Dummy
carbs, banjo fittings,
red fuel line, linkage,
scoops, and more
Click Here for all of our front-end, brake, rotors
page.  Call us for the latest and lowest Speedway
front-end quotes...Spring-Over, Spring-Behind,
Chrome, Stainless Steel, or Plain steel.
Brass Fuel Inlet Repair Insert - These brass inserts are used to repair the damaged or stripped fuel inlet threads on Stromberg 97/81/48 bodies. Use a 33/64 drill and 9/16-18 tap or buy our complete repair kit below. (Priced each).
Regular Price
 $24.95
Sale Price:
 $19.95
Brass Fuel Inlet Repair Insert - Don't throw that precious Stromberg away because of striped fuel inlet threads repair it with our repair kit which includes insert, 9/16-18 tap, 33/64 drill bit, and instructions. This is not a helicoil this is a solid brass insert!
Regular Price
 $56.95
Sale Price:
 $50.00
Worried about trying this repair yourself?  Our staff can do it for you, just give us a call.  We can put the insert in for you, rebuild your
carb, take yours as a core against one of our completely refurbished units, or almost anything in between.  Just give us a call at
913-244-0112  We've done hundreds of these carbs 2x2 setups, 3x2 setups (flathead and small block chevy) 6x2 setups.  We know our
stuff and build them the right way.  We don't just "kit" carbs, we completely tear them down, ultra-sonically clean them, lightly bead
blast them, repair and replace parts as needed, then and only then rebuild them to proper spec's and torque settings.  Is this time
consuming YES, but it is the only way to assure your carb comes out performing as it was designed.
========================================================================================================================================================
Counter
Gas Alley Streetrods
New Phone#
Phone: 913-244-0112
email:
rickshelton@gasalleystreetrods.com
New!!!!
"The Evil Twin" Aluminum Skull Air Scoop - super quality with great polished finish. Designed to fit carburetors with 2-5/8" top like Stromberg 97 or Holley 94 ( Set screws not included - priced each ).
$72.50
Reconditioned Stromberg Large Logo 97 with choke, Ultra-sonicaly cleaned, lightly bead blasted, throttle body base powder coated gloss black, body and air horn shot with Eastwoods pewter, new gaskets, inlet valve and seat, idle check valve, power valve, o-rings, idle adjustment screws, stainless steel screws and washers. They don't get any better than this.
Regular Price
Sale Price:
 $355.00
$360.00
Your name:
Your email address:
Your phone number:
Comments:
Looking for a particular part but don't see it on our
website?  Fill out the form to the right here tell us in the
comments section the manufacture and their part# and
we'll get right back with you on the lowest price!
Just like our 3x2v4
3 Deuces above
but this setup
utilizes Small Logo
97's
Regular Price:
 $1,320.00
Introductory
 Sale Price:
 $1,265.00
3x2V4 3 Deuces for your 4 Barrel Intake Stromberg 48's(one with choke) Carburators, 3x2 to 4 Barrel adapter, and Ball Bearing Linkage, Brass Fuel Inlets . The easy way to go 3 Dueces on your current 4 Barrell Intake. This is the answer. Fully reconditioned Stromberg 48's, Ultra-sonicaly cleaned, lightly bead blasted, base powder coated gloss black, body and air horn shot with Eastwoods pewter, new gaskets, inlet valve and seat, idle check valve, power valve, o-rings, idle adjustment screws, stainless steel screws and washers. Call us for other multi-carb setups! We offer Large Logo 97's, Small Logo 97's, 81's and 48's
Regular Price:
 $1,260.00
Sale Price:
 $1,145.00
===========================================================================================================================================================================================
Standard finishes for our carbs are listed below, but we can finish almost any way you prefer.  Natural state (after bead
blasting - old school), gold, clear(to stop rust of the throttle body), etc.  Just tells us how you want them (except
chrome)...No additional costs.  We carry the full of Mr Stromberg carburetors for your ride.
================================================================================================================================================================
===============================================================================================================================================================
Due to the huge popularity of the
Corvair cowl steering adapter
please allow 2 weeks for delivery
Note: this adapter comes in raw steel
Cowl Steering Adapter for the Corvair Steering box - This adapter bolts directly to the corvair steering box output shaft Comes complete with output shaft adapter, extension shaft and bolts and straight pitman arm. The extension shaft is 10 1/2 inches from the mounting plate to the inside of the pitman arm. You can easily "cut down" the extension shaft to your desired length prior to final welding. The pitman arm can then be drilled to accept your heim joint or tie rod end of you choosing. Overall pitman arm length is 8 1/2" and maximum hole to hole drilled is 7". We strongly suggest the use of a support near the cowl exit for the extension shaft (available separately).
Regular Price:
 $225.00 Sale Price:
 $199.95
Support Bearing
$17.50
========================================================================================================================================================
As seen in Street Rodder Magazine.
Check it out the full article here!
Click here to check out Street Rodders Magazine
Tech Editor - Jim Rizzo's blog on this new product!
I-Beam Axle Kit w/Wishbones - For a truly nostalgic look, you need a set of split wishbones on your old Ford. This kit includes a set of new split wishbones, 4" drop I-beam axle, reverse eye spring, shackles, lower shock mounts, spring perches, and all hardware. '28-36 Ford I-Beam Axle, 4 inch drop, 48" end to end, Use with Ford Spindles, Super Glide Cross Spring, Split Wishbones 41", Plain Sprig Perches, Zinc-Plated Shackles 1-3/4", Plain Forged Lower Shock Mounts, Jam Nuts/Rod Ends - 11/16" RH Plain, Radius Rod Frame Brackets - 7 degree taper for the Ford Tie rods, 4-38" tall
NEW!!!
 $699.99
==========================================================================================================================================================
Click here to see all of
our front-end kits
I-beams,
split-wishbones, tube
axles, and brake kits
===============================================================================================================================================================
Fan us on Facebook by clicking
hereFan us on Facebook
Stainless Steel Carburetor Throttle Arm - This super nice Stainless Steel throttle arm is 1-7/8" long and an awesome 5/16" thick! Even the set screw is Stainless Steel! Fits a .274 shaft (or can be drilled out for oversize throttle shaft) for use on Stromberg, Holley 94 and Edelbrock 94 carbs. Made in USA.
Regular Price
 $10.00
Sale Price:
 $8.95
Combine the carb arm at the left with
our other connectors to come up with a
solution to your linkage needs.  Click
here. Lokar cables / transmission
kick-downs / Spherical end (hiems) /
ball stops / choke the possibilities are
endless!!
Brand New Reversed Corvair Steering Box. All new componets with nut and washer. These are designed to be used on traditional steering cars and are constructed of steel to ensure durability never available with the original. Painted black. Does not include pitman arm.
Regular Price:
 $355.00
Sale Price:
 $339.99
Brand New Vega Steering Box. This Vega Steering Box is perfect for that cross steering setup.
Regular Price
 $175.00
Sale Price:
 $135.95
Vega Pitman Arm. This pitman arm works with our Vega Steering Boxes. Make sure you pick one of these up when you buy your box.
Regular Price:
 $49.95
Sale Price:
 $35.00
===========================================================================================================================================================
Lucky 7 - 4" Drop Axle Forge I-Beam Drilled. 46" Center to Center at Kingpin Holes. 2-1/4" Perch Bosses. Takes 29" Spring. 35" Center to Center between Spring Perch Hole.
Regular Price:
 $375.00
Sale Price:
 $325.00
New!
Lucky 7 - 46" Forged 4 inch Dropped Tube Axle. 46" from kingpin to kinpin center, 2-1/4" Perch Bosses, Takes 29" Spring. 33-1/2" from center to center between Perch holes
Regular Price:
 $185.00
Sale Price:
 $165.00
New!
=============================================================================================================================================================
King of the Road Spring Perch. This spring perch is one of a kind.
Regular Price:
 $90.00
Sale Price:
 $79.00
Wicked Spring Perch 2-1/2" Drop. Coolest Spring Perch on the Market. Made from 1/4" Plate Steel. Fits 3" Front Cross member and 1-3/4" Spring. Laser cut and Tig Welded in the USA!
Sale Price:
 $59.99
Regular Price:
 $75.00
New!
New!
Complete 37-41 Ford Spindles. Fitted with Kingpins. Chrome
Regular Price:
 $279.99
Sale Price:
 $249.99
Complete 37-41 Ford Spindles. Fitted with Kingpins. Raw
Regular Price:
 $229.99
Sale Price:
 $199.99
New!
New!
=============================================================================================================================================================
===============================================================================================================================================================
32 Ford Grille Insert in Stainless Steel
Regular List
 $225.00
Sale Price:
 $179.99
32 Ford Steel Grille Shell only.
Regular List
 $275.00
Sale Price:
 $199.99
32 Ford Steel Grille Shell with Insert. This is a nice steel 32 Ford Grille Shell and Stainless Steel Insert
Regular List
 $475.00
Sale Price:
 $379.99
Introductory Sale Pricing!
==================================================================================================================================================================
Click here to check
out the radiators that
fit these shells!
================================================================================================================================================================
32 Ford Stock Steel Firewall. This is a new stock steel 32 Ford Firewall with no holes. Has mounting feet and is a nice new quality piece. Will look nice in your hot rod brought to you at a price you can afford. Will fit 32 Ford Passenger cars and trucks. One piece construction and looks great!
Regular List
 $675.00
Sale Price:
 $600.00
New!
Intro
Pricing
New!
Intro
Pricing
New!
Intro
Pricing
New!
Intro
Pricing
========================================================================================================================================================
New! Skull 3 Port Fuel Block - Polished. Fittings not included but tapped Inlet The inlet, in the guys ear is ¼ in. NPT. Outlets-ones coming out of their mouths are 1/8 in. NPT. 1 ¾ in. tall. Mounting hole center to center is 5 1/8 in.
Regular Price
$49.50
Sale Price:
 $47.50